Sealing rotary motion under vacuum
Ferrofluid rotary vacuum feedthroughs transmit rotary motion into a vacuum chamber. The sealing mechanism relies on a ferrofluid held in place by permanent magnets. In PECVD and CVD equipment, this allows for the controlled rotation of substrates or internal components during thin film deposition processes. These processes handle materials like amorphous silicon, silicon oxide, and silicon nitride. The need for a hermetic, non-contaminating seal is non-negotiable in this environment.
Technical specifications from the field
Industry data provides concrete benchmarks for feedthrough performance. For precise UHV applications, solid shaft models can maintain a vacuum level of 10⁻⁸ Torr. Other configurations are rated for XHV conditions below 10⁻⁹ mbar, a requirement for high-purity semiconductor manufacturing. Maximum operational speeds for these seals vary significantly by design. One series can reach 18,200 RPM, while another common type operates at approximately 5,000 RPM. Temperature limits are often set at 80°C. These figures establish the performance envelope engineers must consider.
The hollow axle advantage
A hollow axle magnetic fluid feedthrough builds on this core technology. The central bore allows for the passage of utilities like electrical wires, cooling lines, or gas supply tubes alongside the rotational axis. This is useful in complex PECVD systems where multiple functions must enter the chamber through a single port. The design consolidates interfaces, saving space and simplifying the vacuum boundary. It maintains the hermetic sealing and high-speed capability of standard ferrofluidic seals while adding functionality.
Application in deposition processes
In PECVD systems for display manufacturing, these feedthroughs support processes for both amorphous silicon and metal oxide backplane technologies. The equipment deposits doped and undoped silicon layers, silicon oxynitride, and in-situ multi-layer films. A rotating substrate holder can promote film uniformity. A hollow axle feedthrough could allow for power to a heating element or signals from a thickness monitor to pass through the rotating assembly, enabling more sophisticated process control within the vacuum environment.
We develop magnetic fluid feedthroughs for these demanding vacuum applications, including designs tailored for semiconductor and coating equipment.

